View XV2-N-2_5993563.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

enclosed switches ze/zv/xe/xv f-119 limit switches enclosed switches ze/zv/xe/xv long service life and large breaking power ze, zv, and zv2 incorporate model z basic switches with rug- ged diecast cases. available with various models of built-in switches (including split contact model, maintained operation type, magnetic blowout model) and various actuators. model number structure model number legend 1. built-in switch z: spdt (ac) x: spdt (dc) 2. mounting direction e: side mounting v: base mounting v2: diagonal side mounting 3. actuator q: plunger q22: roller plunger q21: crossroller plunger qa2: roller arm lever qa277: one-way action roller arm lever n: sealed plunger n22: sealed roller plunger (ze, zv, zv2 only) n21: sealed crossroller pl unger (ze, zv, zv2 only) na2: sealed roller arm lever na277: sealed one-way action roller arm lever 4. conduit/ground terminal none: g 1 / 2 /without ground terminal g1: g 1 / 2 /with ground terminal g: pg13.5/with ground terminal sg1: 1 / 2 -14npsm/with ground terminal yg1: m20/with ground terminal s: 1 / 2 -14npsm/without ground terminal y: m20/without ground terminal 1 2 3 4 @@ - @ - 2 @
f-120 enclosed switches ze/zv/xe/xv ordering information list of models standard switches note: 1. the diagonal side mounting model feature impr oved sealing property, improved mounting st rength through use of m5 screws, increa sed stability in seating with large mounting width (31 x 75 mm) and permit coupling of a number of switch units. 2. ze, zv, and zv2 series are approved by ul and csa. specifications approved standards note: models xe, xv, and xv2 are not approved by ul and csa. approved standard ratings ul/csa contact actuator side mounting diagonal side mounting base mounting general purpose sealed (booted) general purpose sealed (booted) general purpose sealed (booted) ac/dc load spdt plunger ze-q-2 ze-n-2 zv2-q-2 zv2-n-2 zv-q-2 zv-n-2 roller plunger ze-q22-2 ze-n22-2 zv2-q22-2 z v2-n22-2 zv-q22-2 zv-n22-2 crossroller plung- er ze-q21-2 ze-n21-2 zv2-q21-2 z v2-n21-2 zv-q21-2 zv-n21-2 roller arm lever ze-qa2-2 ze-na2-2 zv2-qa2-2 zv2-na2-2 zv-qa2-2 zv-na2-2 one-way action arm lever ze-qa277-2 ze-na277-2 zv2-qa277-2 z v2-na277-2 zv-qa277-2 zv-na277-2 dc load spdt plunger xe-q-2 xe-n-2 xv2-q-2 XV2-N-2 xv-q-2 xv-n-2 roller plunger xe-q22-2 --- xv2-q22-2 --- xv-q22-2 --- crossroller plung- er xe-q21-2 --- xv2-q21-2 --- xv-q21-2 --- roller arm lever xe-qa2-2 xe-na2-2 xv2-qa2-2 xv 2-na2-2 xv-qa2-2 xv-na2-2 one-way action arm lever xe-qa277-2 xe-na277-2 --- xv2- na277-2 xv-qa277-2 xv-na277-2 agency standard file no. ul ul508 e76675 csa csa c22.2 no. 14 lr45746 model rated voltage current horsepower ze 125 vac 15 a 1/8 hp 1/4 hp 250 vac 480 vac 125 vdc 0.5 a --- 250 vdc 0.25 a
enclosed switches ze/zv/xe/xv f-121 limit switches ratings note: 1. the above figures are for standard currents. 2. inductive loads have a power factor of 0.4 min. (ac) and a time constant of 7 ms max. (dc). 3. lamp load has an inrush current of 10 times the steady-state current. 4. motor load has an inrush current of 6 times the steady-state current. characteristics note: 1. the above figures are initial values. 2. ip65 for @ e-n models and ip60 for @ e-q models. 3. the values are calculated at an operating temperature of 5 c to 35 c, and an operating humidity of 40% to 70%. contact your omron sales representative for more detailed in formation on other operating environments. 4. at the operation limit positions. 5. only for plunger, sealed plunger, roller arm lever, and sealed roller arm lever. 6. only for crossroller plunger, s ealed crossroller plunger , roller plunger, and sealed roller plunger. contact contact rated voltage non-inductive load inductive load resistive load lamp load inductive load motor load nc no nc no nc no nc no ze- @ zv- @ zv2- @ 125 vac 15 a 3 a 1.5 a 15 a 5 a 2.5 a 250 vac 15 a 2.5 a 1.25 a 15 a 3 a 1.5 a 480 vac 10 a 1.5 a 0.75 a 6 a 1.5 a 0.75 a 125 vdc 0.5 a 0.5 a 0.05 a 0.05 a 250 vdc 0.25 a 0.25 a 0.03 a 0.03 a xe- @ xv- @ xv2- @ 8 vdc 15 a 3 a 3 a 15 a 15 a 10 a 10 a 14 vdc 15 a 3 a 3 a 15 a 10 a 10 a 10 a 30 vdc 15 a 3 a 3 a 10 a 10 a 10 a 6 a 125 vdc 10 a 3 a 1.5 a 7.5 a 6 a 6 a 4 a 250 vdc 3 a 1.5 a 0.75 a 2 a 1.5 a 2 a 1 a inrush current nc 30 a max. no 15 a max. degree of protection ip65 (see note 2) durability (see note 3) mechanical: z @ : 10,000,000 operations min. x @ : 1,000,000 operations min. electrical: z @ : 500,000 operations min., for 15 a, 250 vac resistive load x @ : 100,000 operations min., for 10 a, 125 vdc resistive load operating speed plunger type: 0.01 mm to 0.5 m/s lever type: 0.02 mm to 0.5 m/s operating frequency mechanical: 120 operations/min electrical: 20 operations/min rated frequency 50/60 hz insulation resistance 100 m ? min. (at 500 vdc) contact resistance 15 m ? max. (initial value) terminal temperature rise 50 max. dielectric strength 1,000 vac, 50/60 hz for 1 min between terminals of the same polarity 2,000 vac, 50/60 hz for 1 min between current-carrying metal part and ground, and between each terminal and non-current-carrying metal part (1,500 vac for z @ models and x @ models) vibration resistance malfunction: 10 to 55 hz, 1.5-mm double amplitude (see note 4) shock resistance (see note 4) destruction: 1,000 m/s 2 min. malfunction: 100 m/s 2 min. (see note 5), 50 m/s 2 min. (see note 6) ambient temperature (see note 1) operating: ?10 c to 80 c (with no icing) ambient humidity operating: general-purpose type: 85% max. sealed type: 95% max. weight approx. 260 to 280 g
f-122 enclosed switches ze/zv/xe/xv operating characteristics note: 1. the op of zv2-q-2/xv2-q-2 is 24.2 0.8 mm. 2. the op of zv2-q22-2/xv2-q22-2 is 35.7 1 mm. 3. the op of zv2-q21-2/xv2-q21-2 is 35.7 0.8 mm. note: 1. the op of zv2-n-2/XV2-N-2 is 31.9 0.8 mm. 2. the op of zv2-n22-2/zv2-n21-2 is 35.7 0.8 mm. model ze-q-2 xe-q-2 ze-q22-2 xe-q22-2 ze-q21-2 of 2.45 to 3.43 n 5.00 n max. 2.45 to 3.43 n 5.00 n max. 2.45 to 3.43 n rf min. 1.12 n 1.12 n 1.12 n 1.12 n 1.12 n pt max. 0.4 mm 0.9 mm 0.5 mm 0.9 mm 0.5 mm ot min. 5.5 mm 5.5 mm 3.6 mm 3.6 mm 3.6 mm md max. 0.05 mm 0.47 mm 0.05 mm 0.47 mm 0.05 mm op 38.2 0.8 mm 49.7 1 mm 49.7 1 mm model xe-q21-2 ze-qa2-2 xe-qa2-2 ze-qa277-2 xe-qa277-2 ze-n-2 of 5.00 n max. 5.59 n max. 6.47n max. 5.59 n 6.47 n 7.85 n rf min. 1.12 n 1.67 n 1.67 n 1.67 n 1.67 n 2.35 n pt max. 0.9 mm 4 mm 6 mm 4 mm 6 mm 2 mm ot min. 3.6 mm 6 mm 5.5 mm 6 mm 5.5 mm 5 mm md max. 0.47 mm 0.4 mm 0.72 mm 0.4 mm 0.72 mm 0.1 mm op 49.7 1 mm --- 45.8 0.8 mm model xe-n-2 ze-n22-2 ze-n21-2 ze-na2-2 xe-na2-2 ze-na277-2 of 10.20 n 4.90 n 6.28 n 7.26 n 6.28 n rf min. 2.35 n 0.98 n 2.26 n 2.26 n 2.26 n pt max. 3 mm 1 mm 5 mm 6 mm 5 mm ot min. 4 mm 3.5 mm 6 mm 5.5 mm 6 mm md max. 0.47 mm 0.12 mm 0.4 mm 0.72 mm 0.4 mm op 45.8 0.8 mm 49.7 0.8 mm --- model xe-na277-2 zv(2)-q-2 xv(2)-q-2 zv(2)-q22-2 xv(2)-q22-2 of 7.26 n 2.45 to 3.43 n 5.00 n max. 2.45 to 3.43 n 5.00 n max. rf min. 2.26 n 1.12 n 1.12 n 1.12 n 1.12 n pt max. 6 mm 0.4 mm 0.9 mm 0.5 mm 0.9 mm ot min. 5.5 mm 5.5 mm 5.5 mm 3.6 mm 3.6 mm md max. 0.72 mm 0.05 mm 0.47 mm 0.05 mm 0.47 mm op --- 63.7 0.8 mm (zv-q-2, xv-q-2) (see note 1) 75.2 0.8 mm (zv-q-22.2, xv-q21-2) (see note 2) model zv(2)-q21-2 xv(2)-q21-2 zv(2)-qa2-2 xv(2)-qa2-2 zv(2)-qa277-2 of 2.45 to 3.43 n 5.00 n max. 5.59 n max. 6.47 n max. 5.59 n rf min. 1.12 n 1.12 n 1.67 n 1.67 n 1.67 n pt max. 0.5 mm 0.9 mm 4 mm 6 mm 4 mm ot min. 3.6 mm 3.6 mm 6 mm 5.5 mm 6 mm md max. 0.05 mm 0.47 mm 0.4 mm 0.72 mm 0.4 mm op 75.2 0.8 mm (zv-q22-2, xv-q21-2) (see note 3) --- model xv(2)-qa277-2 zv(2)-n-2 xv(2)-n-2 zv(2)-n22-2 zv(2)-n21-2 zv(2)-na2-2 of 6.47 n 7.85 n 10.20 n 4.90 n 6.28 n rf min. 1.67 n 2.35 n 2.35 n 0.98 n 2.26 n pt max. 6 mm 2 mm 3 mm 1 mm 5 mm ot min. 5.5 mm 5 mm 4 mm 3.5 mm 6 mm md max. 0.72 mm 0.1 mm 0.47 mm 0.12 mm 0.4 mm op --- 71.4 0.8 mm (zv-n-2, xv-n-2) (see note 1) 75.2 0.8 mm (zv-n22-2, zv-n21-2) (see note 2) --- model xv(2)-na2-2 zv(2)-na277-2 xv(2)-na277-2 of 7.26 n 6.28 n 7.26 n rf min. 2.26 n 2.26 n 2.26 n pt max. 6 mm 5 mm 6 mm ot min. 5.5 mm 6 mm 5.5 mm md max. 0.72 mm 0.4 mm 0.72 mm fp max. --- op ---
enclosed switches ze/zv/xe/xv f-123 limit switches contact form engineering data electrical durability com nc no ze- @ , zv- @ , zv2- @ xe- @ , xv- @ , xv2- @ com nc n o en60947-5-1 note: with the xe- @ , xv- @ , and xv2- @ , be sure to connect com to the + terminal. ze (cos = 1) durability (x 10 4 operations) durability (x 10 4 operations) durability (x 10 4 operations) durability (x 10 4 operations) operating frequency: 20 operations/min ot: full stroke operating frequency: 20 operations/min ot: full stroke operating frequency: 20 operations/min ot: full stroke operating frequency: 20 operations/min ot: full stroke switching current (a) switching current (a) switching current (a) switching current (a) ze (cos = 0.4) xe (l/r = 7 ms) xe (l/r = 0) 480 vac 125 vac 250 vac 125 vac 125 vdc 125 vdc 250 vac 250 vdc 250 vdc 480 vac
f-124 enclosed switches ze/zv/xe/xv nomenclature dimensions note: 1. all units are in millimeter s unless otherwise indicated. 2. unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 3. in the drawings for the base mounting type switches (zv), the m ounting surfaces (flanges) are sh own by lines of alternate long and two short dashes. side mounting pin plunger separator built-in switch terminal seal rubber (nbr) cover conduit opening case tightening band rubber cap (cr) 19 25.5 24 86 23 17 25.4 0.12 2.1 0.1 25.4 0.3 25.4 0.3 19 25.5 24 86 23 17 25.4 0.12 2.1 0.1 25.4 0.3 19 25.5 24 86 23 17 25.4 0.12 2.1 0.1 plunger ze-q-2, xe-q-2 12r (see note) jis b0202 g1/2 effective thread: 4 threads min. pt op two, m4 (length: 45) note: stainless steel plunger two, m4 (length: 45) pt op 12.7 dia. 4.8 (see note) jis b0202 g1/2 effective thread: 4 threads min. note: stainless steel roller crossroller plunger ze-q21-2, xe-q21-2 two, m4 (length: 45) pt op 12.7 dia. 4.8 (see note) jis b0202 g1/2 effective thread: 4 threads min. roller plunger ze-q22-2, xe-q22-2 note: stainless steel roller
enclosed switches ze/zv/xe/xv f-125 limit switches 19 25.5 24 86 23 17 25.4 0.12 2.1 0.1 25.4 0.3 19.3 39.7 44 0.8 (23.1) (40) 17.4r 39.7 19 25.5 24 86 23 17 25.4 0.12 2.1 0.1 25.4 0.3 44 0.8 19.3 19 25.5 24 86 23 25.4 0.12 2.1 0.1 25.4 0.3 17 19 25.5 24 86 23 25.4 0.12 2.1 0.1 25.4 0.3 17 19 25.5 24 86 23 25.4 0.12 2.1 0.1 25.4 0.3 17 roller arm lever ze-qa2-2, xe-qa2-2 two, m4 (length: 45) note: 1. stainless sintered roller 2. adjustable between 0 and 225 two, m4 (length: 45) two, m4 (length: 45) (see note 2) 19.1 dia. 7.9 (see note 1) jis b0202 g1/2 effective thread: 4 threads min. one-way action roller arm lever ze-qa277-2, xe-qa277-2 18.7 dia. 9 (see note 1) operate in this direction only jis b0202 g1/2 effective thread: 4 threads min. 17.4r (see note 2) note: 1. stainless sintered alloy roller 2. adjustable between 0 and 225 sealed plunger ze-n-2, xe-n-2 note: stainless steel plunger jis b0202 g1/2 effective thread: 4 threads min. 12r (see note) pt op two, m4 (length: 45) jis b0202 g1/2 effective thread: 4 threads min. pt op note: stainless steel roller 12.7 dia. 4.8 (see note) sealed roller plunger ze-n22-2 note: stainless steel roller two, m4 (length: 45) jis b0202 g1/2 effective thread: 4 threads min. pt op 12.7 dia. 4.8 (see note) sealed crossroller plunger ze-n21-2
f-126 enclosed switches ze/zv/xe/xv base mounting/diagonal side mounting 25.4 0.3 19 25.5 24 86 23 17 25.4 0.12 2.1 0.1 53.4 0.8 (23.1) 39.7 19.3 two, m4 (length: 45) 19.1 dia. 7.9 (see note 1) sealed roller arm lever ze-na2-2, xe-na2-2 jis b0202 g1/2 effective thread: 4 threads min. note: 1. stainless steel roller 2. adjustable between 0 and 225 (see note 2) 19.3 25.4 0.3 19 25.5 24 86 23 17 25.4 0.12 2.1 0.12 53.4 0.8 (40) 39.7 25.4 0.1 two, m4 (length: 45) 18.7 dia. 9 (see note 1) note: 1. stainless steel roller 2. adjustable between 0 and 225 one-way action sealed roller arm lever ze-na277-2, xe-na277-2 (see note 2) 17.4r jis b0202 g1/2 effective thread: 4 threads min. operates in this direction only mounting hole two, 4.3 dia. mounting holes or m4 screw holes 25.4 0.3 5 26.1 54 86 23 17 75 0.2 5.5 31 0.2 36.6 41.3 0.2 3 10.5 0.3 pt 12r (see note 1.) note: 1. stainless steel plunger 2. only the zv2-q-2 and xv2-q-2 incorporate mounting holes. 3. op for zv2-q-2 and xv2-q-2 is 24.2 0.8 mm. plunger zv(2)-q-2, xv(2)-q-2 jis b0202 g1/2 ef- fective thread: 4 threads min. two, 4.3 0.2 dia. holes op (see note 3) op (see note 4) 53r ? 0 two, 5.4 +0.2 dia. holes (see note 2) t = 3 (zv-q-2/xv-q-2 flange)
enclosed switches ze/zv/xe/xv f-127 limit switches 25.4 0.3 26.1 23 75 0.2 5.5 31 0.2 41.3 0.2 5 54 36.6 10.5 0.3 17 3 86 31 0.2 pt 12.7 dia. 4.8 (see note 1) note: 1. stainless steel roller 2. only the zv2-q22-2 and xv2-q22-2 incorporate mount- ing holes. 3. op for zv2-q22-2 and xv2-q22-2 is 35.7 1 mm. roller plunger zv(2)-q22-2, xv(2)-q22-2 two, 4.3 0.2 dia. holes op (see note 3) op (see note 4) 53r ? 0 two, 5.4 +0.2 dia. holes (see note 2) jis b0202 g1/2 effective thread: 4 threads min. t = 3 (zv-q22-2/xv-q22-2 flange) 25.4 0.3 26.1 23 75 0.2 5.5 41.3 0.2 5 54 36.6 10.5 0.3 17 3 86 31 0.2 41.3 0.2 54 36.6 10.5 0.3 3 25.4 0.3 23 17 86 23.1 max. 39.7 30 0.8 69.5 0.8 19.3 pt 12.7 dia. 4.8 (see note 1) note: 1. stainless steel roller 2. only the zv2-q21-2 and xv2-q21-2 incorporate mounting holes. 3. op for zv2-q21-2 and xv2-q21-2 is 35.7 0.8 mm. crossroller plunger zv(2)-q21-2, xv(2)-q21-2 two, 4.3 0.2 dia. holes op (see note 3) op (see note 4) 53r ? 0 two, 5.4 +0.2 dia. holes (see note 2) jis b0202 g1/2 effective thread: 4 threads min. two, 4.3 0.2 dia. holes 53r note: 1. stainless sintered alloy roller 2. adjustment between 0 to 225 . 3. only the zv2-qa2-2 and xv2-qa2-2 incorporate mounting holes. 19.1 dia. 7.9 (see note 1) ? 0 two, 5.4 +0.2 dia. holes (see note 3) jis b0202 g1/2 effective thread: 4 threads min. 23.1 max. (see note 2) roller arm lever zv(2)-qa2-2, xv(2)-qa2-2 t = 3 (zv-q21-2/xv-q21-2 flange) t = 3 (zv-qa2-2/xv-qa2-2 flange)
f-128 enclosed switches ze/zv/xe/xv 25.4 0.3 26.1 23 75 0.2 5.5 5 17 3 86 pt 41.3 0.2 54 10.6 0.3 36.6 41.3 0.2 54 10.6 0.3 36.6 25.4 0.3 26.1 23 5.5 5 17 3 31 0.2 75 0.2 86 31 0.2 53r one-way action roller arm lever zv(2)-qa277-2, xv(2)-qa277-2 two, 4.3 0.2 dia. holes t = 3 (zv-qa277-2/xv-qa277-2 flanges) 18.7 dia. 9 (see note 1) note: 1. stainless steel roller 2 . adjustment between 0 to 225 . 3. only the zv2-qa277-2 and xv2-qa277-2 incorporate mounting holes. (see note 2) ? 0 two, 5.4 +0.2 dia. holes (see note 3) jis b0202 g1/2 effective thread: 4 threads min. operates in this direction only pt two, 4.3 0.2 dia. holes op (see note 3) op (see note 4) ? 0 two, 5.4 +0.2 dia. holes (see note 2) jis b0202 g1/2 effective thread: 4 threads min. 12cr (see note 1) 53r note: 1. stainless steel plunger 2. only the zv2-n-2 and XV2-N-2 incorporate mounting holes. 3. op for zv2-n-2 and XV2-N-2 is 31.9 0.8 mm. two, 4.3 0.2 dia. holes 53r 12.7 dia. 4.8 (see note 1) jis b0202 g1/2 effective thread: 4 threads min. pt op (see note 3) op (see note 4) ? 0 two, 5.4 +0.2 dia. holes (see note 2) note: 1. stainless steel roller 2. only the zv2-n22-2 incorpo incorpo- rate mounting holes. 3. op for zv2-n22-2 is 35.7 0.8 mm. sealed roller plunger zv(2)-n22-2 sealed plunger zv(2)-n-2, xv(2)-n-2 t = 3 (zv-n-2/xv-n-2 flange) t = 3 (zv-n22-2 flange)
enclosed switches ze/zv/xe/xv f-129 limit switches 25.4 0.3 26.1 23 75 0.2 5.5 41.3 0.2 5 36.6 10.6 0.3 3 86 31 0.2 pt 54 53r pt 12.7 dia. 4.8 (see note 1) note: 1. stainless steel roller 2. only the zv2-n21-2 in- corporate mounting holes. 3. op for zv2-n21-2 is 35.7 0.8 mm. sealed crossroller plunger zv(2)-n21-2 two, 4.3 0.2 dia. holes op (see note 3) op (see note 4) t = 3 (zv flange) ? 0 two, 5.4 +0.2 dia. holes (see note 2) jis b0202 g1/2 effective thread: 4 threads min. 53r 17.4r 19.1 dia. 7.9 (see note 1) note: 1. stainless steel roller 2. adjustment between 0 to 225 . 3. only the zv2-na2-2 and xv2-na2-2 incorporate mounting holes. sealed roller arm lever zv(2)-na2-2, xv(2)-na2-2 two, 4.3 0.2 dia. (see note 2) t=3 (zv-na2-2/xv-na2-2 flanges) ? 0 two, 5.4 +0.2 dia. holes (see note 3) jis b0202 g1/2 effective thread: 4 threads min. one-way action sealed roller arm lever zv(2)-na277-2, xv(2)-na277-2 18.7 dia. 9 (see note 1) tw o, 4.3 0.2 dia. t=3 (zv-na277-2/xv-na277-2 flanges) operates in this direction only (see note 2) ? 0 two, 5.4 +0.2 dia. holes (see note 3) note: 1. stainless steel roller 2. adjustment between 0 to 225 . 3. only the zv2-na277-2 and xv2-na277-2 incorporate mounting holes. jis b0202 g1/2 effective thread: 4 threads min. 53r
f-130 enclosed switches ze/zv/xe/xv precautions correct use mounting with the roller lever-type enclos ed switches, the roller arm has been temporarily tightened prior to shipment, so that its position may be adjusted later. when mounting the switch, be sure to re-tighten the roller arm so as to prevent it from becoming loose during opera- tion. to adequately maintain the seals at the mounting screw section on the side of the enclosed switch, insert each o-ring correctly and secure it with the lock nut. to provide the switch with improved sealing property, use of the sc connector is recommended. when routing wires into the conduit opening, be sure that cuttings and other foreign matter do not enter the switch. environmental precautions sealing materials may deteriora te when used outdoors or when exposed to cutting oil, solvents, or chemicals. check this on actual equipment and, if deterioration is foreseen, consult your omron representative in advance. be sure to protect part a with grease in order to maintain the mechanical life and performance of the limit switch. the use of molybdenum disulfide grease is recommended. tightening torque a loose screw may result in a malfunction. be sure to tighten each screw to the proper tightening torque as shown below. note: 1. this torque range applies to side mounting or bottom mounting. (m4 screws for head) 2. this torque range applies to side diagonal mounting. (m5 allen-head bolt) mounting mounting holes operation operating method, shape of ca m or dog, operating frequency, and the overtravel (ot) have significant effect on the service life and precision of the limit switch. make sure that the shape of the cam is smooth enough. check that ot has a sufficient margin. the actual ot should be rated ot x 0.7 to 1. dedicated wrench the roller arm can be set freely within a range of 225 after loosening the nut. the roller arm mounting bracket can be set in any direction after loosening the nut. a dedicated wrench is provided separately. model: supana for ze make sure that the nut is free of foreign substances when the nut is loosened. no. type torque 1 cover mounting screw 1.18 to 1.37 nm 2 switch mounting screw (see note 1) 1.18 to 1.37 nm 3 switch mounting screw (see note 2) 4.90 to 5.88 nm 4 switch terminal screw (m4 screws for head) 0.78 to 1.18 nm 5 roller arm mounting nut 4.90 to 5.88 nm side mounting bottom mounting side diagonal mounting two, 4.3 dia. mounting holes or m4 screw holes two, 4.3 dia. mounting holes or m4 screw holes two, 5.4 dia. mounting holes or m5 screw holes in the interest of product improvement, specif ications are subject to change without notice. all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.03 937. to convert grams into ounces, multiply by 0.03527. cat. no. c020-e1-09

▲Up To Search▲

Price & Availability of XV2-N-2

	To Download XV2-N-2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .